Details
Description
An excellent sealer for masonry, plaster and concrete surfaces. It reduces damage from alkali and salts. By sealing powdery porous surfaces, it provides greatly improved coverage of emulsion top coats.
Recommended Usage
It is for all brickwork and masonry surfaces, walls, ceilings, exterior façade of buildings. To seal poor distemper and lime wash coated surfaces.
COMPOSITION
Based on special binder vehicle and pigments.
MIXING RATIO
Single pack, ready to use.
COVERAGE
12-14 m2 per liter per coat.
FILM THICKNESS
10 to 15 microns per coat.
THINNER
Mineral Turpentine/White Spirit
FLASH POINT
34°C
PRE PAINTING STEPS
NEW SURFACES
Run down the surface with a stiff bristle brush or rubbing stone to remove any loose and friable material. Check that the surface is thoroughly dry and free from efflorescent salts.
OLD SURFACES
For old surfaces, especially white- washed surfaces, scraped down to bare surface and wash with spray water to ensure freedom from contaminants like grease and oil etc.
FINISHING
Fill all surface imperfections with Gobi's Sona Wall Putty before over coaling with Gobi's Plastic Emulsion.
How To Apply
NEW SURFACES
Apply one continuous coat of Gobi's wall sealer after thinning it with up to 10 % mineral turpentine /white spirit.
OLD SURFACES
Apply one continuous coat of Gobi's wall sealer after thinning it with up to 10 % mineral turpentine /white spirit.
PRECAUTIONS
Allow to dry for 24 hours.