Details
Description
A premium water borne emulsion paint that has excellent coverage and smooth matt finish.
Recommended Usage
It is suitable for all interior masonry, concrete, plaster and brick surfaces. Particularly recommended for ceilings.
COMPOSITION
Based on copolymer emulsion binder and durable Lead-free pigments and extenders
ODOR
Odorless/VOC free
FLASHING POINT
Not applicable.
MIXING RATIO
Single pack ready to use after thinning 30-40 % with water
FILM THICKNESS
25-30 microns per coat
COLOR
Wide range available,see shade card.
COVERAGE CAPACITY
14-16 m2 per liter per coat on non-porous surfaces.
WET-SCRUB RESISTANCE
More than 50 times at wet film thickness of 100 microns (TQC Washability tester AB 5000)
GLOSS
Matt.
SPECIFIC GRAVITY
1.59 -1.60 g/L
NUMBER OF COATS
Two Coat Finish.
PACK SIZE
0.91, 3.64 & 14.56 liters
NON-VOLATILE MATTER
65±2
DRYING TIME
Surface Dry 30Min.Recoat able 2hours.
VISCOSITY
28-32 P (Poise)
APPLICATION
Brush & Roller or conventional Spray.
VOLUME SOLIDS
42-45 %
THINNER
Water
![](./images/amf-sse-pe-numbercoat.png)
![](./images/sse-pe-dryingtime.png)
![](./images/sse-pe-recoat.png)
![](./images/amf-sse-pe-application.png)
![](./images/amf-sse-pe-colors.png)
![](./images/sse-pe-gloss.png)
![](./images/sse-packs.png)
Pre Painting Steps
NEW SURFACES
Ensure that the surface is thoroughly dry. Allow all the efflorescent salts to diffuse to the surface until white residue does not appear on the surface. Remove all loose powder by sweeping with brush using a rubbing stone and sand paper.
OLD SURFACE
Thoroughly clean the surface and remove old loose paint. If the surface has been previously with “oil bound” distemper, white wash or any other powdery coating it should be completely scraped.
FINISHING
Stir and mix the paint to smooth consistency
How To Apply
NEW SURFACES
Apply a sealing coat of Gobi’s Aqueous wall sealer. Let it to dry overnight. Interior surfaces should be filled with Gobi’s Sona wall putty to ensure smooth and uniform finish.
OLD SURFACE
Apply a sealing coat of Gobi’s aqueous wall sealer and let it to dry overnight. Interior surfaces should be filled with Gobi’s Sona wall putty to ensure a smooth and uniform finish.
FINISHING
Apply two coats of Gobi’s Silksheen Emulsion for smooth and luxurious finish