Details
Description
Economical water borne emulsion paint that has excellent coverage and smooth matt finish.
Recommended Usage
It is suitable for all interior masonry, concrete, plaster and bricks surfaces. Particularly recommended for ceilings.
COMPOSITION
Based on copolymer emulsion binder & derable lead free pigments.
MIXING RATIO
Single pack, ready to use after thinning.
COVERAGE
14-16 m2 per liter per coat on non-porous surfaces.
ODOR
Odorless / VOC free.
FILM THICKNESS
20 to 25 microns per coat.
THINNER
Water
FLASH POINT
Not applicable
PRE PAINTING STEPS
NEW SURFACE
Ensure that the surface is thoroughly dry. Allow all the efflorescent salts to diffuse to the surface until white residues do not appear on the surface. Remove all loose powder by sweeping with brush using a rubbing stone and sand paper.
OLD SURFACE
Thoroughly clean the surface and remove old loose paint. If the surface has been previously painted with "oil bound" distemper, white wash or any other powdery coating it should be completely scraped.
FINISHING
Stir and mix the paint to smooth consistency.
HOW TO APPLY
NEW SURFACE
Apply sealing coat of Gobi's Gold wall sealer. Let it dry over night. Interior surfaces should be filled with Gobi's Sona wall putty to ensure smooth and uniform finish.
OLD SURFACE
Apply a sealing coat of Gobi's Gold wall sealer and let it dry over night. Interior surfaces should be filled with Gobi's Sona wall putty to ensure smooth and uniform finish.
FINISHING
Add up to 60% water to Gobi's Gold Luxurious emulsion and apply two to three coats.