Total item
Cart Subtotal
Rs 0.00 Details
Description
Gold Aqueous Matt Finish is an economical silky finish with outstanding scrub and scratch resistance. The product is washable with good water repellency and environmental friendly.
Recommended Usage
Suitable for interior and exterior walls, ceiling and partitions.
COMPOSITION
Based on co-polymer acrylic binder and highly durable pigments free from toxic metals.
ODOR
Odorless/VOC free
COLOR
Wide range available, see shade card.
MIXING RATIO
Single pack ready to use after thinning 30-40 % with water.
FILM THICKNESS
25-30 microns per coat
GLOSS
A subtle Silk sheen
COVERAGE CAPACITY
15-17 m2 per liter per coat on non-porous surfaces.
WET-SCRUB RESISTANCE
More than 800 times at wet film thickness of 100 microns. (TQC Washability Tester AB 5000)
PACK SIZE
0.91, 3.64, 14.56 Liters
SPECIFIC GRAVITY
1.40-1.41 g/L
NUMBER OF COATS
Two to Three
NON-VOLATILE MATTER
56-59%
APPLICATION
Brush & Roller or conventional Spray.
VISCOSITY
110-120 Ku (Krebs)
THINNER
Water
VOLUME SOLIDS
39-43 %
FLASHING POINT
>34 C
DRYING TIME
Surface Dry 1 Hour Recoat able 3-4hours
Pre Painting Steps
NEW SURFACES
Ensure that the surface is thoroughly dry. Allow all the efflorescent salts to diffuse to the surface until white residues do not appear on the surface. Remove all loose powder by sweeping with brush using a rubbing stone and sand paper.
OLD SURFACE
Thoroughly clean the surface and remove old loose paint. If the surface has been previously with “oil bound” distemper, white wash or any other powdery coating it should be completely scraped.
FINISHING
Thin paint to brushing consistency with clear water. The first coat must be applied thin by brush in order to seal the surface. Apply by brush or roller two to three coats.
How To Apply
NEW SURFACES
Apply a sealing coat of Gobi’s Wall Sealer. Make good all surface roughness and imperfections with Gobi’s Sona wall putty. Allow the putty to dry for 3-4 hrs. before finishing with Gold Aqueous Matt Finish.
OLD SURFACE
Apply a sealing coat of Gobi’s Wall Sealer and allow it to dry overnight. Make good all surface roughness and imperfection with Gobi’s Sona wall putty before finishing with Gold Aqueous matt finish.
FINISHING
When Applying by brush, load the brush generously, apply a full even coat. Avoid applying very thick coat. When applying by roller sir the paint to smooth consistency before pouring into the roller tray and apply freely over the surface.